Tested under load
Hydraulic and vibration testing on the bench before shipment, with a certified curve per unit.
Process pumping
AX-360 Series
Centrifugal pumping set for continuous duty
Description
Skid-mounted single-stage centrifugal pump, sized for continuous duty at altitudes and temperatures outside the standard catalogue range.
The set arrives works-tested, aligned on its baseplate, with the instrumentation already wired to the terminal block. On site you connect suction, discharge and power: commissioning typically takes a day.
01 / 04Specifications
What sets this unit apart
Cartridge mechanical seal
Replaced without stripping the set or realigning it: the job drops from six hours to ninety minutes.
Epoxy resin baseplate
Damps vibration and holds alignment through thermal expansion.
Integrated instrumentation
Vibration, bearing temperature and differential pressure wired to a single terminal block.
02 / 04Specifications
Technical data
| Rated flow | 60 – 480 m³/h |
|---|---|
| Head | 12 – 96 m |
| Service temperature | -10 °C to 140 °C |
| Maximum working pressure | 25 bar |
| Casing material | Ductile iron / 316 stainless steel |
| Seal | Single or pressurised double cartridge |
| Motor | IE3, 400/460 V, 50/60 Hz |
| IP rating | IP55 (IP66 optional) |
| Assembly weight | 480 – 1 240 kg |
Applications
- Process water and utilities
- Transfer duty in food and beverage plants
- Boosting in district-metered mains
- Recirculation in a cooling circuit
Certifications
03 / 04Downloads
Technical documentation
In this demo, downloads open the contact form: a real catalogue would serve the PDF here, gated or ungated depending on commercial policy.
04 / 04Quotation
How this unit is bought
No shopping cart: price depends on volume, Incoterm and lead time. Send us the operating conditions and you will receive a technical and commercial proposal.